Stylish Teal Matt Blackout Curtain

€100.47 / pcs.
The lowest price in the last 30 days: €100.47
(as for height 220cm, width 70cm, mat. 150cm)
Fabric price €35.57 /lm.

Choose for your own window:

Choose top finish

for clips, hooks, gathering tape no. 1

  • Fold ratio 1:2
  • Height of the pleat tape: 5cm
  • Fitting with hooks, clips and sliders

How to measure the height for this pleat:

pomiar-karnisz.jpg

The height of curtain for this pleat style shall be measured from the clip/hook to the floor (or windowsill). Then subtract 1 to 3 cm from the measured height, depending on how high you want the drape to hang above the floor. Enter the resulting value into the height field.

Description:

The tape arranges the fabric in folds in a ratio of 1:2 (2 running metres of fabric are needed for 1 metre of finished, creased drape). Tape height: 5 cm. For this tape it is possible to fit hooks (clip pins) in two different places, in this way it is possible to adjust the height by approx. 1 cm.

for clips, hooks, with frill, gathering tape no. 3

  • Fold ratio 1:2,5
  • Height of the pleat tape: 5 cm
  • Frill height approx. 4/5 cm (cover the clips)
  • Fitting with hooks, clips and sliders

How to measure the height for this pleat:

pomiar-karnisz.jpg

The height of curtain for this pleat style shall be measured from the clip/hook to the floor (or windowsill). Then subtract 1 to 3 cm from the measured height, depending on how high you want the curtain to hang above the floor. Enter the resulting value into the height field.

Description:

This pleating tape is commonly referred to as a "pencil tape". The tape arranges the fabric into creases at a ratio of 1:2.5 (2.5 linear metres of fabric are required for 1 metre of finished, pleated drape). Height of the tape: 5 cm. With this pleating tape, it is possible to attach hooks (clips, sliders) at two different points so that the height can be adjusted by approx. 1 cm. The frill above the tape is 4/5 cm high.

for curtain rod, rod pocket no. 5

  • Fold ratio 1:2
  • Height of the pleat tape: 10 cm
  • Mounted directly on the curtain pole

How to measure the height for this pleat:

pomiar-tunel.jpg

Measure the height from the top of the curtain rod to the floor (or windowsill). In the case of braces, this height should be entered in the measurement field, so that the drape hangs approx. 2 cm above the floor.

Description:

The pleated tape commonly referred to as "braces". At the top the tape organises the fabric into even pleats, which are usually aligned in this way all the way to the bottom. The tape arranges the pleats in a ratio of 1:2 (2 linear metres of fabric are required for 1 metre of finished pleated drape). Height of the tape: 10 cm.

for curtain rod, rod pocket no. 6

  • Fold ratio 1:2
  • Height of the tunnel: 5 cm
  • Mounted directly on the curtain pole

How to measure the height for this pleat:

pomiar-tunel.jpg

Measure the height from the top of the curtain pole to the floor (or windowsill). Then subtract approx. 2 cm from the measured height - the curtain will then hang approx. 2 cm above the floor (if you want it shorter - subtract 3-4 cm from the measurement). Enter the calculated value in the input field for the height.

Description:

With „Tunnel” the fabric is arranged in irregular folds. The tunnel made of stitched fabric is inserted onto the curtain pole and the fabric folds itself due to the double amount of fabric. Tunnel height approx. 5 cm.

for curtain rod, with frill, rod pocket no. 7

  • Fold ratio 1:2
  • Height of the tunnel: 5 cm, frill: 3/4 cm
  • Mounted directly on the curtain pole

How to measure the height for this pleat:

pomiar-tunel.jpg

Measure the height from the top of the curtain pole to the floor (or windowsill). Then subtract approx. 2 cm from the measured height - the drape will then hang approx. 2 cm above the floor (if you want it shorter - subtract 3-4 cm from the measurement). Enter the calculated value in the input field for the height.

Description:

With "Tunnel", the fabric is arranged in irregular folds and there is a frill about 5 cm high above the tunnel. The tunnel made of stitched fabric is inserted onto the drape pole and the fabric folds itself due to the double amount of fabric. Tunnel height approx. 5 cm and additional frill approx. 3/4 cm high.

for track, Wave, no sliders, Band No. 8

  • Already have a track with the Wave system sliders inserted? This top finish of the drape will suit you.
  • Drape supplied with the Wave band sewn in and the snails inserted into the band (but without sliders).

How to measure the height for this top finish?

pomiar-szyna.jpg

Measure the height from the eyelet to the floor (or windowsill). Then subtract 2 cm from the measured height. Enter this value in the height measurement field.

Description:

The band gathers the fabric into folds at a ratio of 1:2.3 (2.3 linear metres of fabric are needed for 1 metre of finished, wrinkled drapes). It is possible to attach hooks to the band in two different places, allowing the height to be adjusted by approximately 1 cm. Bottom finishing - hemming and additionally weights inserted into the hem at the corners of the drape.

for track, Wave, sliders included, Band No. 13

  • You already have a track, without sliders, and want a drape arranged in beautiful Wave waves? This top finish of the drape will suit you.
  • Drape supplied with the Wave band sewn in, snails inserted into the band and sliders (connected by cord).
  • is your track suitable for these sliders? Do a coin test (see ‘Description’ below)

How to measure the height for this top finish?

pusta-szyna.jpg

Measure the height from the bottom of the track to the floor (or windowsill). Then subtract 3 cm from the measured height. Enter the value so calculated in the height measurement field.

Description:

The width of the track gap should be between 6.0 and 6.5 mm. This can easily be checked using coins. Three 10-cent coins should fit into the track slot (as shown in the photo gallery at the top). The band gathers the fabric into folds at a ratio of 1:2.3 (2.3 running metres of fabric are needed for 1 metre of finished, wrinkled drape). Hooks are clipped into the band, which can be clipped in two positions, allowing height adjustment of approx. 1 cm. Bottom finishing - hemming and additionally weights inserted into the hem in the corners of the drape. Included with the drape is an appropriate number of round-headed sliders, (connected by a cord), to be inserted into the track.

for track with hooks, Band No. 9

  • Have you got a track with hooks? This top finish of the drape will suit your track.
  • The band beautifully lines up the fabric, as shown in the picture
  • drape supplied with the band sewn in

How to measure the height for this top finish?

pomiar-szyna.jpg

Measure the height from the hook to the floor (or window sill). Then subtract 2 cm from the measured height. Enter the value calculated in this way in the height measurement field.

Description:

The band gathers the fabric into folds at a ratio of 1:2 (2 running metres of fabric are needed for 1 metre of finished, wrinkled drapes). It is possible to attach hooks to the band at two different points on the band, allowing the height to be adjusted by approximately 1 cm. Bottom finishing - hemming and additionally weights inserted into the hem at the corners of the drape.

for eyelet track, Band No. 12

  • Have you got an eyelet track? This top finish of the drape will suit your track.
  • The band gathers the fabric beautifully, as shown in the picture
  • drape supplied with the band sewn in and the snails inserted into the band (to be inserted into eyelets)

How to measure the height for this top finish?

pomiar-szyna.jpg

Measure the height from the eyelet to the floor (or window sill). Then subtract 2 cm from the measured height. Enter the value calculated in this way in the height measurement field.

Description:

The band gathers the fabric into folds at a ratio of 1:2 (2 running metres of fabric are needed for 1 metre of finished, gathered drape). It is possible to attach hooks to the band in two different places, allowing the height to be adjusted by approximately 1 cm. Bottom finishing - hemming and additionally weights inserted into the hem at the corners of the drape.

Heading /Top-Finish pleat tape, no. 9

  • Fold ratio 1:2,5
  • Height of the pleat tape: 7,5 cm
  • Frill height approx. 4/5 cm (cover the clips)
  • Fitting with hooks, clips and sliders

How to measure the height for this pleat:

pomiar-karnisz.jpg

The height of curtain for this pleat style shall be measured from the clip/hook to the floor (or windowsill). Then subtract 1 to 3 cm from the measured height, depending on how high you want the curtain to hang above the floor. Enter the resulting value into the height field.

Description:

This pleating tape is commonly referred to as a "pencil tape". The tape arranges the fabric into creases at a ratio of 1:2.5 (2.5 linear metres of fabric are required for 1 metre of finished, pleated curtain). Height of the tape: 5 cm. With this pleating tape, it is possible to attach hooks (clips, sliders) at two different points so that the height can be adjusted by approx. 1 cm. The frill above the tape is 4/5 cm high.

Set desired dimensions

A cm
B cm
material total width -- cm
In stock
SKU
z1181-2-290
--,--

Dark-teal made to measure blackout curtains with excellent light blocking, improved privacy and a refined contemporary look — ideal for living rooms, bedrooms and home offices.

Dark Teal Blackout Curtains – Tailored Style & Complete Comfort
These contemporary made-to-measure blackout curtains in a deep dark teal shade bring a bold and refined look to any room while delivering excellent functional performance. Tailored specifically for your windows, they provide reliable total or partial blackout, helping you control daylight with ease. Whether you want a darker setting for restful sleep or simply need to soften bright sunshine during the day, the dense construction of the blackout fabric ensures outstanding light blocking.

Designed to support everyday comfort, these curtains also help reduce exterior noise and contribute to a more stable indoor temperature — creating a peaceful, well-insulated atmosphere in every season. Their thickness and tightly woven structure offer reassurance that your privacy is protected, enhancing the feeling of intimacy and calm throughout the day and evening.

The rich dark-teal colour adds depth and elegance to modern décor, pairing beautifully with both warm neutrals and cooler tones. These blackout curtains suit a variety of spaces: living rooms where you want a cosy ambience, dining rooms where you gather with guests, home offices that benefit from reduced glare, and bedrooms where high-quality rest matters most.

Expert stitching ensures that the curtain panels maintain a smooth, balanced drape over time — neat folds, a polished finish, and a clean silhouette that instantly elevates your window styling. The fabric is pleasant to handle and remains easy to position, making everyday use simple and enjoyable.

For a perfect blend of privacy, comfort and stylish sophistication, these dark-teal made to measure blackout curtains are an ideal addition to your home.

Top standard - the premium iDESCU collection.

Colour: Dark Teal Material: 100% Polyester Weight: 240g/m2

Cleaning, maintenance: By following the maintenance instructions, you can be sure that the curtains will not shrink after washing. Iron at temperatures up to 100 degrees C.

Every effort is made to ensure that the colours shown on the screens match the real ones as closely as possible. However, due to the different types of displays in phones, these may differ from the actual colours of the materials.


More Information
Colour Green and Emerald
Transparency Blackout
Fabric Type Soft, Matt, Double-Sided
Write Your Own Review
You're reviewing:Stylish Teal Matt Blackout Curtain

See Your New Window Decorations Before You Buy.
You no longer have to imagine the result – simply see it on a photo of your own room.

We have created a free app that lets you generate a realistic visualization of your window decorations on your own photo in just a few moments.

It's really simple:

  • Take a photo of your living room, bedroom, kitchen, or any other room.
  • Choose the type of window decoration – curtains, sheers, or Roman blinds.
  • Select the fabric and colour you like.
  • Tap the iD+ button.

Within moments, you'll see a realistic visualization of the selected fabric on your window – exactly how it could look once it has been made.

The iDESCU app helps you quickly see what will truly look great in your home. No guessing, no risk, and no costly mistakes.

From Visualization to a Finished Window Decoration
If you like a particular design, you can easily turn it into an order.

Simply open the visualization in the Gallery, enter your window dimensions, and choose the preferred finishing option – for a ceiling track, curtain rod, or another mounting solution. With just one click, you'll instantly receive a price quote.

Place your order, and within just a few days you'll receive a made-to-measure window decoration, crafted exactly according to the design you created yourself.  

iDESCU – I DESign my CUrtains

© 2026 iDESCU. All rights reserved.